spjallid.is

Ég var aðeins að nördast með SpeedFan mældi diskana í TV tölvunni en hún er með 2 stk. 2.5 diska.
Svo mældi ég flakkarana tvo. Þ.e. er með IOMEGA 2.5 flakkara og svo stakan 1TB disk sem ég smelli í tengibrú.
Veit svo sem ekki hvað maður á að taka mikið mark á svona testum, en ég horfi aðalega á Power on hours og Power cycle count.
Kannski á maður frekar að horfa á eitthvað annað?
Endilega ef þið hafið tíma og nennið, sendið inn aflestur af ykkar diskum.

1TB Toshiba 2.5" (TV tölva)
500GB Samsung 2.5" (TV tölva)

1TB Samsung 3.5" (flakkari)
160GB Seagate 2.5" (flakkari)

Myndi horfa á sector töluna líka, ekki það að neitt sé athugavert við hana hjá þér.

en ef hún fer að hækka þá fer að koma tími á að skipta diskinum út

Speedfan finnur ekki hörðu diskana mína

Dazy crazy skrifaði:Speedfan finnur ekki hörðu diskana mína

sama hér

Það þarf að taka þessum upplýsingum með fyrirvara.

Ég setti tvo nýja 1,5TB Samsung og einn 1TB Seagate disk í vélina mína formataði þá og athugaði síðan hvað SMART í Speedfan segði um þá.

Ég gerði svokallað in-depth online analysis á þeim. Niðurstaðan var að overall fitness fyrir Samsung diskana báða var 91% og performance 90%. Nokkrir þættir í testinu gáfu einnig til kynna að ég þyrfti að fylgjast vel með diskunum. Seagate diskurinn kom svipaður út úr testinu.

Þetta voru semsagt niðurstöður sem maður mátti eiga von á ef um væri að ræða nokkurra ára gamla diska en ekki nýja og ónotaða.

Kv. Skari

Þú verður nú að koma með nánari útlistanir skari.

Hvaða hlutar voru það nákvæmlega sem voru ekki að skora hátt?


Ég hef lent í því að fá input/output villur á nokkurra mánaða gömlum diskum... Svo lag ég smart upplýsingarnar og þá voru bad sectors á diskunum....

Harðir diskar geta klikkað, óháð aldri. (þótt aldur hjálpi ekki til)

hauksinick skrifaði:

Dazy crazy skrifaði:Speedfan finnur ekki hörðu diskana mína

sama hér

prófið að keyra speedfan sem administrator þá virkar það allavega í windows 7 og vista

sakaxxx skrifaði:

hauksinick skrifaði:

Dazy crazy skrifaði:Speedfan finnur ekki hörðu diskana mína

sama hér

prófið að keyra speedfan sem administrator þá virkar það allavega í windows 7 og vista

Þarna,svona virkar þetta..

Almost every EIDE or SATA hard disk includes S.M.A.R.T. data. That information is collected by the drive itself and contains data that the manufacturer considered relevant to check reliability. The data is made up of several attributes that have a current value, a worst one, a threshold, some raw data, and some flags. Basically, when any attribute's current value is below its threshold, the hard disk is considered unreliable and likely to fail. By using several techniques, this report tries to give a wider range of info, basing its analysis on advanced comparisons with normal values based on real hard disks and on expert-like checks. The final results are not to be taken as an absolute truth, but they are a very good approach to what a professional would say about your hard disk status.
Your hard disk is a TOSHIBA MK5055GSX with firmware FG001M.
The average temperature for this hard disk is 37C (MIN=27C MAX=47C) and yours is 28C.
Your hard disk's S.M.A.R.T. attributes are now being analyzed and a full report about the reliability, health and status of your hard disk is generated:
Your hard disk is not below any attribute threshold. This is good.
Your hard disk was never below any attribute threshold. This is good.
Your hard disk is now being compared to real data used to define normal values for your specific hard disk model. This way, the analysis can automatically use proper operating ranges. The images give you an idea of how each attribute is within such range. Current and raw values are shown for easier reference for experienced users. There are 3001 hard disk models in the current archive.

Attribute Current Raw Overall
Raw Read Error Rate 100 0 Very good
Throughput Performance 100 0 Very good
Spin Up Time 100 1614 Very good
Start/Stop Count 100 2530 Very good
Reallocated Sector Count 100 0 Very good
Seek Error Rate 100 0 Very good
Seek Time Performance 100 0 Very good
Power On Hours Count 94 2595 Good
Spin Retry Count 150 0 Very good
Power Cycle Count 100 2503 Very good
GSense Error Rate 100 580 Very good
Power Off Retract Count 100 42 Very good
Load Cycle Count 100 8771 Very good
Reallocated Event Count 100 0 Very good
Current Pending Sector 100 0 Very good
Offline Uncorrectable Sector Count 100 0 Very good
Ultra DMA CRC Error Rate 200 0 Very good
Disk Shift 100 100 Very good
Loaded Hours 95 2210 Good
Load Retry Count 100 0 Very good
Load Friction 100 0 Very good
Load In Time 100 231 Very good
Write head 100 0 Very good

All of the attributes of your hard disk have normal values. This is good.

The overall fitness for this drive is 100%.
The overall performance for this drive is 100%.
The link to get back and see a new report about this hard disk in the future is this. Consider that new hard disks and new checks are added over time.

kemur svona hjá mér.

á fartölvunni .

annars skal ég setja inn af hinni fartölvunni nenni ekki á borðtölvunni ekki búin að kveikja á henni lengi og er bara útí skúr

ST9160310AS The Seagate® Momentus® 5400.5 SATA 3Gb/s 160-GB Hard Drive

Er þetta ekki frekar slæmt ?

Varðandi það sem ég sagði hér áðan þá verður að taka testinn með fyrirvara.

Einhver sagði að einhverra mánaða gamlir diskar geti klikkað og það er rétt. Ég kannast vel við það enda er ég ávallt með marga diska í gangi. Þessir þrír diskar þ.e. tveir 1.5TB Samsung og 1TB Seagate voru keyptir fyrir nokkrum vikum síðan og ég gerði prófið strax eftir að þeir voru settir í vélina. Báðir Samsung diskarnir komu nákvæmlega eins út úr testinu og Seagate var með svipaða einkunn. Meðfylgjandi er útskriftin fyrir báða Samsung diskana.

Diskur 1 (diskur hefur aðeins verið notaður sem gagnageymsla)

Your hard disk is a SAMSUNG HD154UI with firmware 1AG01118.
The average temperature for this hard disk is 26C (MIN=18C MAX=36C) and yours is 25C.
Your hard disk's S.M.A.R.T. attributes are now being analyzed and a full report about the reliability, health and status of your hard disk is generated:
Your hard disk is not below any attribute threshold. This is good.
Your hard disk was never below any attribute threshold. This is good.
Your hard disk is now being compared to real data used to define normal values for your specific hard disk model. This way, the analysis can automatically use proper operating ranges. The images give you an idea of how each attribute is within such range. Current and raw values are shown for easier reference for experienced users. There are 3001 hard disk models in the current archive.

Attribute Current Raw Overall
Raw Read Error Rate 100 0 Normal
Spin Up Time 72 9330 Very good
Start/Stop Count 98 2433 Watch
Warning: Start/Stop Count is below the average limits (99-100).
Reallocated Sector Count 100 0 Very good
Seek Error Rate 253 0 Very good
Seek Time Performance 100 0 Very good
Power On Hours Count 99 3253 Normal
Spin Retry Count 100 0 Very good
Calibration Retry Count 100 0 Very good
Power Cycle Count 100 58 Very good
Read Soft Error Rate 100 0 Normal
Unknown attribute 183 100 0 Very good
End To End Error Count 100 0 Very good
Reported Uncorrectable Errors 100 0 Very good
Command Time Out 100 0 Very good
Hardware ECC Recovered 100 46626 Very good
Reallocated Event Count 100 0 Very good
Current Pending Sector 100 0 Very good
Offline Uncorrectable Sector Count 100 0 Very good
Ultra DMA CRC Error Rate 100 0 Normal
Write Error Rate 100 0 Normal
Soft Read Error Rate 253 0 Very good


NOTE: not all warnings are reflected on fitness and performance overall values as relevancy is based upon the settings from the hard disk manufacturer who is the best entity deputed to define such relationships.


The overall fitness for this drive is 91%.
The overall performance for this drive is 90%.
The link to get back and see a new report about this hard disk in the future is this. Consider that new hard disks and new checks are added over time.

Diskur 2 (Diskurinn hefur aðeins verið notaður sem gagnageymsla)

Your hard disk is a SAMSUNG HD154UI with firmware 1AG01118.
The average temperature for this hard disk is 26C (MIN=18C MAX=36C) and yours is 26C.
Your hard disk's S.M.A.R.T. attributes are now being analyzed and a full report about the reliability, health and status of your hard disk is generated:
Your hard disk is not below any attribute threshold. This is good.
Your hard disk was never below any attribute threshold. This is good.
Your hard disk is now being compared to real data used to define normal values for your specific hard disk model. This way, the analysis can automatically use proper operating ranges. The images give you an idea of how each attribute is within such range. Current and raw values are shown for easier reference for experienced users. There are 3001 hard disk models in the current archive.

Attribute Current Raw Overall
Raw Read Error Rate 100 0 Normal
Spin Up Time 72 9260 Very good
Start/Stop Count 97 2738 Watch
Warning: Start/Stop Count is below the average limits (99-100).
Reallocated Sector Count 100 0 Very good
Seek Error Rate 253 0 Very good
Seek Time Performance 100 12481 Very good
Power On Hours Count 99 3274 Normal
Spin Retry Count 100 0 Very good
Calibration Retry Count 100 0 Very good
Power Cycle Count 100 74 Very good
Read Soft Error Rate 100 0 Normal
Unknown attribute 183 100 0 Very good
End To End Error Count 100 0 Very good
Reported Uncorrectable Errors 100 0 Very good
Command Time Out 100 0 Very good
Hardware ECC Recovered 100 440381 Very good
Reallocated Event Count 100 0 Very good
Current Pending Sector 100 0 Very good
Offline Uncorrectable Sector Count 100 0 Very good
Ultra DMA CRC Error Rate 100 0 Normal
Write Error Rate 100 0 Normal
Soft Read Error Rate 253 0 Very good


NOTE: not all warnings are reflected on fitness and performance overall values as relevancy is based upon the settings from the hard disk manufacturer who is the best entity deputed to define such relationships.


The overall fitness for this drive is 91%.
The overall performance for this drive is 90%.
The link to get back and see a new report about this hard disk in the future is this. Consider that new hard disks and new checks are added over time.

Þegar ég segi að það verði að taka niðurstöðinni með fyrirvara þá er ég ekki endilega að meina að það sé eitthvað Speedfan það gæti þessvegna verið eitthvað annað. Hvað veit ég en að tveir þrír nýir ónotaðir diskar skili þessum niðurstöðum er of mikið til að hægt sé að tala um að það sé ávallt eitthvað hlutfall nýrra diska sem séu ekki í lagi.

Þriðji diskurinn er í annarri vél og get því akki sent það strax hér inn.

Kv. Skari

Strákar miklu flottara að setja linkana inn.
Hægrismella og gera save as.

Hvernig virkar það þegar það er alltaf sama nafn á linknum