spjallid.is

Sælir ,

Datt í hug ég deili með ýkkur (þau sem hafa áhuga) ferlið af Fractal Design Define C Verkefninu mínu,

Project Cyber K.I.D.



Njótið myndirnar.


Part 1:

So tha plans are as followed,
Removing the rear panel of the Fractal Define C Case and Building my own out of 3mm rustfree steel.
i had laying around a piece that almost fitted perfectly (i thought only shortening it would do)
but i had to drimm off the side a litte - 4mm to be exact.
then i had to file everyting to fit nicely,especially the corners they had to be a exact to fit nicely in the bottom and top panel.

after that i had to preinstall the mainboard and draw where the IO cutout had to go,from there the next step where to think about how i wanted to have the GPU,since the main reason for reconstructing my own backpanel was the polacement of the gpu in a differrent way.

after that it was simple,take the jigsaw with an ireon blade and cut out the two holes file everything down and make it look a little cleaner,
then go over everything with some sandpaper to make it "babybuttsmooth"

After everything was ready ,it was off to paint,first primer and then black matt paint to match the paint of the case (at least try).
let everything dry for 48 hours or so,the assemble everything.

next i painted the mainboard cover of the Asus Sabertooth Z77 Motherboard which will house a delidded 3770k which should be plenty
for gaming the next few years overclocked @ 4.6- 4.8 ghz.

and don´t worry the motherboard cover will not be so green in the end (these are only the first steps)

Stay tuned for more to come soon
















installed the waterblock on the 970 card
and
did finetune the cosmetic aspects of the gpu a little with some custom vinyl and some acrylic :-)

working on Cables and led's today.
Have to train the cables forst though.
*tightfit.
Also speedmatching the two pumps.
one is an Alphacool D5 and the other is a
alohacool Dc LT.


Almost there...
almost there.....

Hey everyone i would like to share with you the final outcome of my just finished work on the Fractal Design ´s Define C Computer Case.
Hope you like the final pictures.

Thank you for checking out my Buildlog.


Until soon!!!

Holy Moly,Þetta er svakalega vel gert!!!

Hlakka til að sjá hvaða smiði koma næst frá þér,

Ok, þetta mod er einum of flott hjá þér vel gert.

Hvað ertu eiginlega komin með marga kassa hjá þér ? orðin frekar virkur undan farnar vikur

Dúlli skrifaði:Ok, þetta mod er einum of flott hjá þér vel gert.

Hvað ertu eiginlega komin með marga kassa hjá þér ? orðin frekar virkur undan farnar vikur

Takk fyrir hrósið
eins og er er ég með 7 kassar hjá mér,

2 af þeim eru í vinnslu hítt er í bið eftir hugmydnum (er að teikna níður og púnkta niður hvað þarf að gera hugmyndum og annað)

einn af þeim 7 er Powermac G5 Sem ég er mjög spenntur í að vinna með !!

gotit23 skrifaði:Holy Moly,Þetta er svakalega vel gert!!!

Hlakka til að sjá hvaða smiði koma næst frá þér,

Takk fyrir hrósið ,margt planað sumt í vinnslu
keep u posted!!

Flott build en engar UV myndir áttu ekki UV led frá mér ?

mundivalur skrifaði:Flott build en engar UV myndir áttu ekki UV led frá mér ?

Takk fyrir Jú er með aurora Led í kassanum

Hér eru nokkrar LED myndir

möguleiki að nálgast þessu led kerfi með mísmunandi stillingum og á góðu verði,
á Icemmodz.com

http://www.icemodz.eu/#!/Lighting/c/5346676/offset=0&sort=normal

Töff, hvernig græni líturinn fær UV effect með Led ljósinu!!

Hér stutt myndband af projectinu.

https://www.youtube.com/watch?v=dG1DFE3Wd_U

Þetta er hríkalega flott ,mjög vél gert !!

gotit23 skrifaði:Þetta er hríkalega flott ,mjög vél gert !!

Takk fyrir